# Difference Between 14 SEER and 16 SEER (With Table)

With increasing global warming and high temperatures, the use of ACs is increasing, rapidly. SEER (Seasonal Energy Efficient Ratio) is a ratio between Cooling output during the cooling season ,i.e. summer, and energy used during that season.14 SEER and 16 SEER are some of the most common ratios used in ACs these days.

## 14 SEER vs 16 SEER

The main difference between 14 SEER and 16 SEER is that 16 SEER is much more efficient than 14 SEER, as they vary only on the basis of effective efficiency. The higher the rating of Seasonal energy efficient ratio higher is the efficiency. Therefore,16 SEER is more efficient than 14 SEER air conditioners. 16 SEER is about 13 percent more efficient than 14 SEER.

SEER is a unitless ratio. So,14 SEER, primarily gives 14 values when calculating the ratio between the cooling output of a specific cooling season ,i.e., Summers, and the total amount of energy used in that season. This ratio also provides with an efficiency of the air conditioners.

16 SEER gives 16 values when calculating the ratio between the cooling output of a specific cooling season ,i.e., Summers, and the total amount of energy used in that season. Hence, it’s more efficient.16 SEER uses 13 percent less energy than 14 SEER air conditioners. However, a SEER number of 16 is indeed incredibly fuel efficient, and air conditioners with all these SEER values are much sought after all of these days. These are originally more expensive, and that they will not increase your electricity costs.

## What is 14 SEER?

The seasonal energy efficiency ratio is fixed by the government for minimum energy consumption. The minimum SEER is 13 and the maximum SEER is 22.14 seer gives the value of cooling output by total energy consumption in a specific season as 14.14 SEER usually has a one-stage compressor.

The compressor is a mechanical device present in all technological devices used for cooling. It compresses the air under low pressure which cools the air getting out of the device.

The single-stage compressor is also known as a piston compressor. The cost of installation of 14 SEER is between \$3000 to \$6000 which is approximately 2 lakhs twenty-five thousand and sixty-seven rupees. to 4 lakhs fifty thousand one hundred and thirty-five rupees in INR.

The presence of a single-stage compressor makes the cost price of 14 SEER less and a bit pocket-friendly. Also, as 14 seer has a single-stage compressor the runtime is longer.

To adapt to environment 14 SEER the single-stage compressor of the air conditioner either has to run at full speed or shut off completely. It also makes the environment quite humid.

## What is 16 SEER?

16 SEER gives the ratio between cooling output and total energy consumption in a specific season as 16. This ratio tells about the higher efficiency of 16 SEER.This ratio tells about the higher efficiency of 16 SEER.

After several calculations, it was founded that 14 SEER uses 13 percent of more energy than 16 SEER units device. The meaning of using 13 percent more electricity is that 14 SEER uses 13 watts of more energy than the 16 SEER units device.

16 SEER usually has a two-staged compressor. The two-staged compressor compresses air in two stages. It comes in two pistons. One piston passes the air from one cylinder to another while the second piston pumps the air. The two-staged compressor helps the air conditioner to adapt to the environment easily

Unlike,14 SEER 16 SEER needs not to be run all the time or shut off completely to maintain the temperature. The two-staged compressor makes the temperature of the environment consistent as it has longer run-time. The consistent temperature makes it very comfortable for the user.

Two staged compressor makes the environment less humid and hence the environment is comfortable. But, the cost of the installation of 16 SEER is a bit costly. The price range is \$4000 to \$9000 that is 3 lakhs and three hundred and thirty-four rupees to six lakhs seventy-five thousand seven hundred and seventy-four rupees in INR.

## Main Differences Between 14 SEER and 16 SEER

1. 14 SEER units are less efficient while in contrast, 16 SEER is more efficient.
2. 14 SEER unit has a single staged compressor whereas 16 SEER unit usually has a two-staged compressor.
3. The cost of installation of 14 SEER units is less than 16 SEER units.
4. As 16 SEER unit has a single staged compressor it makes the environment less humid than 14 SEER units.
5. The runtime of 14 SEER units is less than 16 SEER one.
6. The environment of 16 SEER units is more comfortable than 14 SEER units.

## Conclusion

The range of SEER (Seasonal energy efficiency ratio) differ from 13 to 22. 14 SEER is less efficient than 16 SEER.14 SEER has a single staged compressor which adds to its reason behind being not the cool option in front of 16 SEER.

Two staged compressors of 16 SEER create a less humid, consistent, and better environment. So,16 SEER creates a more comfortable environment than 14 SEER.

Despite, all this there is a huge price difference between both the SEER units. The approximate difference of two lakhs differs between both the units. This makes 14 SEER units more pocket-friendly than 16 SEER units.